JeppView Cycle 25-2008
- Type:
- Applications > Windows
- Files:
- 3
- Size:
- 1.12 GB
- Quality:
- +6 / -0 (+6)
- Uploaded:
- Dec 25, 2008
- By:
- b737-500
Cycle 25-2008 with worlwide serial included
benito296 & New Guys
1.- Install:
Jeppview 3 Program_disk_-_Terminal_-_Enroute_charts
This is the setup program ...here you must to enter this serial code VNX1-IBYH-E5K1-7G8F
2.-Install CD1 25-2008:
With this CD1 you must to enter the coverage code:
Worldwide : 253DP18779
VFR Europe : 253DN18778
JMCS- Full WorldWide : 253DM18778
JMCS- Europe-Med/Atlantic : 253DI18782
(JMCS=Jeppview Military Chart Service)
3.- Install CD2
4.- Don't restart
5.- Activate via Phone
...use this code R00D KCAB
END.
Note:
1.- Don't use cracked SETUP.INX (not required)
2.- If you wish you can follow the instructions of JeppView_3_Date_Calc_v1.1a
But don't use the serial and coverage code inside the slide show ...thats codes are not in use!!!
Now if you wish to see you Jeppview 25-2008 like 26-2008 (but not update)
Go to:
C:\Jeppesen\Common\TerminalCharts\Charts.txt
and write this:
Database_Begin_Date=2454827.5
Database_End_Date=2454840
Now when you star again you Jeppview this change the old date in red for the new cycle date ...just that ...isn't a update!!
AND NEVER UPDATE JEPPVIEW ONLINE!!!
Every update is posted here every 14 days!
Happy New Year for all.
1.- Install:
Jeppview 3 Program_disk_-_Terminal_-_Enroute_charts
This is the setup program ...here you must to enter this serial code VNX1-IBYH-E5K1-7G8F
2.-Install CD1 25-2008:
With this CD1 you must to enter the coverage code:
Worldwide : 253DP18779
VFR Europe : 253DN18778
JMCS- Full WorldWide : 253DM18778
JMCS- Europe-Med/Atlantic : 253DI18782
(JMCS=Jeppview Military Chart Service)
3.- Install CD2
4.- Don't restart
5.- Activate via Phone
...use this code R00D KCAB
END.
Note:
1.- Don't use cracked SETUP.INX (not required)
2.- If you wish you can follow the instructions of JeppView_3_Date_Calc_v1.1a
But don't use the serial and coverage code inside the slide show ...thats codes are not in use!!!
Now if you wish to see you Jeppview 25-2008 like 26-2008 (but not update)
Go to:
C:\Jeppesen\Common\TerminalCharts\Charts.txt
and write this:
Database_Begin_Date=2454827.5
Database_End_Date=2454840
Now when you star again you Jeppview this change the old date in red for the new cycle date ...just that ...isn't a update!!
AND NEVER UPDATE JEPPVIEW ONLINE!!!
Every update is posted here every 14 days!
Happy New Year for all.
b737-500 & Velibor & A388
God bless you guys. Happy holidays to all aviators.
Will seed till the new cycle comes out.
God bless you guys. Happy holidays to all aviators.
Will seed till the new cycle comes out.
ThanK you very, very very muuuch chileanpilot and of course thanx to b737-500 for this great wonderful package.
thanks everybody for sharing and I will seed, seed, seed
Happy new year b737-500 and to everybody
Happy new year b737-500 and to everybody
thank you
Thank you, guys. Works like a charm!
Here's the problem I'm having: I install everything and when i start Jeppesen JeppView I get a quick Splash screen and then it dissapears...?
BTW I used the program from the 0720 cycle I think
Thanks a lot.
Merry Christmas and a Happy New Year 2009
Merry Christmas and a Happy New Year 2009
Was I supposed to use the prog disk from the 0720 cycle guys? HELP!
@Title27GT
Follow the instaractions from "chileanpilot at 2008-12-27 15:56 CET:"
Thats all
Follow the instaractions from "chileanpilot at 2008-12-27 15:56 CET:"
Thats all
Hello guys I need some help since I cannot get through this problem by my self:
I have installed both FSFM and JV before and got them working pretty fast.
Now on my new computer both applications crash as soon as the are started. I can get FSFM to work up to version 9.16 but as soon as I update it to 9.3 (or higher) it stops working and crashes at startup. I wasn't able to start any version of JV, any version I found crashed at startup.
Has any one come across this problem before, or can suggest any solution/test?
I have installed the softwares from scratch a dozen times now, with different codes and serials, but I am still here trying to figure out what's going wrong. Thanks in advance for any help.
I have installed both FSFM and JV before and got them working pretty fast.
Now on my new computer both applications crash as soon as the are started. I can get FSFM to work up to version 9.16 but as soon as I update it to 9.3 (or higher) it stops working and crashes at startup. I wasn't able to start any version of JV, any version I found crashed at startup.
Has any one come across this problem before, or can suggest any solution/test?
I have installed the softwares from scratch a dozen times now, with different codes and serials, but I am still here trying to figure out what's going wrong. Thanks in advance for any help.
BTW I got it to work on another PC, but I would like it to work on my computer!! Must be some driver or software that conflicts with Jepp*.
I am still in need of any hint. Thanks once more and Happy new Year to all of you.
I am still in need of any hint. Thanks once more and Happy new Year to all of you.
Roger-Wilco, I am having the same issue as you and am also convinced that there is something wrong with the copy of Windows I am running (I run windows via a Virtual Machine on my Mac)
I tried downloading that other program Disk but the same issue persists.
I tried downloading that other program Disk but the same issue persists.
Title27GT the copy I got running (on a different machine, as I have said) was installed by:
JeppView FliteDeck 3.6.1 Program Disk (http://thepiratebay.ee/torrent/4439022/JeppView_FliteDeck_3.6.1_Program_Disk) and cycle 25-2008 (http://thepiratebay.ee/torrent/4601104/JeppView_Cycle_25-2008)
JeppView FliteDeck 3.6.1 Program Disk (http://thepiratebay.ee/torrent/4439022/JeppView_FliteDeck_3.6.1_Program_Disk) and cycle 25-2008 (http://thepiratebay.ee/torrent/4601104/JeppView_Cycle_25-2008)
Roger-Wilco,
Same here. I am currently installing a different type of Windows XP on my Virtual Machine to see if that makes a difference. Will get back to you on the results.
Same here. I am currently installing a different type of Windows XP on my Virtual Machine to see if that makes a difference. Will get back to you on the results.
roger-wilco,
I tried a Windows XP Home edition over the previous Windows XP Professional edition I was using, and JeppView now works perfectly, and no longer quits on startup.
Hope that helps.
Thanks!
I tried a Windows XP Home edition over the previous Windows XP Professional edition I was using, and JeppView now works perfectly, and no longer quits on startup.
Hope that helps.
Thanks!
Title27GT, both my tests have been carried out with windows XP pro, on one machine it works perfectly on the other I have the crash after the splash screen. Was your XP pro a fresh install or was there other software installed on it? If it was not a fresh install maybe I could send you a list of the software installed on my machine, just to see if you can spot some program that may be the culprit. Thank you for your feedback.
@roger-wilco
Good day
I personally use version Jeppesen FliteStar v8.4 with the updates and modifications around here. The other versions, just don't work for me, they crash all the time.
What I am using are the
JeppView FliteDeck 3.6.1 Program Disk
JeppView Cycle 25-2008
Jeppesen FliteStar v8.4
Update appropriate the Jeppesen FliteStar v8.4
and works all 100%.
Regards
Good day
I personally use version Jeppesen FliteStar v8.4 with the updates and modifications around here. The other versions, just don't work for me, they crash all the time.
What I am using are the
JeppView FliteDeck 3.6.1 Program Disk
JeppView Cycle 25-2008
Jeppesen FliteStar v8.4
Update appropriate the Jeppesen FliteStar v8.4
and works all 100%.
Regards
Cycle 26-08 uploaded! Enjoy!
Comments